仿古门窗的材质是较为容易损坏的，在进行安装的时候，通常是由仿古门窗厂家直接安装，或是寻找专业安装师傅，如果条件允许，相信大家也想尝试亲手安装的乐趣，那么，安装仿古门窗的工艺标准是什么呢?有需要注意些什么呢?

Antique doors material is more easily damaged, the installation time is usually installed directly by antique doors manufacturers, or are looking for professional installation master, if conditions permit, I believe we would like to try the installation of fun, so, what is the standard installation process of antique doors and windows? There is a need to pay attention to what?

首先，要注意翘曲(框、扇)偏差2mm，对角线长度差(框、扇) 2mm，表面平整度(扇)偏差2mm。裁口、线条结合处高低差(框、扇)偏差0.5mm，相邻棂子两端间距偏差1mm。

First of all, we should pay attention to warping (frame, fan) deviation 2mm, diagonal length difference (frame, fan) 2mm, surface roughness (fan) deviation 2mm. Cutting, line junction height difference (frame, fan) deviation 0.5mm, adjacent lattice spacing deviation of both ends of sub 1mm.

其次，仿古建筑门窗只限于室内，用于卫生间时，下部应设置通风百叶窗。

Secondly, the antique building doors and windows are confined to the interior, when used in the bathroom, the lower part of the ventilation shutter should be set.

接下来要注意门套表面应平整、洁净、线条顺直、接缝严密、色泽一致，无裂缝、翘曲及损坏。

The next door to the attention of surface should be flat, clean, straight lines, tight joints, same color, no cracks, warping and damage.

最后，门套制作与安装所使用材料的材质、规格、花纹和颜色、木材的燃烧性能等级和含水率及人造木板的甲醛含量应符合设计要求及现行国家标准的有关规定。

Finally, the formaldehyde content of door manufacture and installation materials used materials, specifications, colors, patterns and wood combustion performance level and water content and artificial wood shall comply with the relevant provisions of existing national standards and design requirements.

虽然仿古门窗的安装步骤短短几句话，但是在安装的过程中一定要小心，以免造成不必要的损失。

Although the installation steps of the antique doors and windows in a few words, but in the installation process must be careful, so as not to cause unnecessary losses.