一般我们关于技术性的东西都是不怎么了解的，所以有的技术工人将你家的什么东西随意装装，你都是看不出来，以后使用就会不方便了，那么仿古门窗安装好之后怎么验收呢？

In general we regarding technical things are not very understanding, so some technical workers will be what you can put, you are not, after use will not convenient, so after the antique doors installed how acceptance?

1、门窗外观检查

1, door and window inspection

远看门窗的光泽度，看门窗表面有无明显的颜色不均匀。然后用尺亮度门窗的尺寸检查是否有变形的情况。近看以及用手摸，感觉门窗表面是否有割收的划痕。

Look at the doors and windows to see the color of the door and window surface, there is no obvious color uniformity. Then use the size of the doors and windows to check whether the deformation. Close look and touch feeling, whether the cut surface and scratches.

2、门窗封条检查

2, check the door and window seals

密封条与玻璃及玻璃槽口的接触应平整，不得卷边、脱槽，带密封条的压条必须与玻璃全部贴紧，压条与型材的接缝处应无明显缝隙，接头缝隙应小于或等于1mm。

The sealing strip and the glass and the glass notch contact should be smooth, not curling, and groove with layering seal must be with the glass all tightly, seams and layering profiles should be no obvious gap, joint should be less than or equal to 1mm.

门窗边框检查

Door frame check

门窗边框安装的好坏直接影响到门窗的牢固性，门窗边框的检查可从其牢固平整、密闭严实度来检查。

Door and window frame installation will directly affect the firmness of the doors and windows, doors and windows of the border inspection from the firm and smooth, tightly closed to check.

1、边框垂直平整度检查

1, the vertical frame flatness check

用垂直测量尺检查门窗框的垂直度范围，一般门窗框的正、侧面垂直度允许偏差为2.5mm，门窗横框的水平允许偏差为2mm，门窗横框标高允许偏差为5mm，门窗竖向偏离中心允许偏差为5mm。

Verticality range vertical measuring ruler to check the door and window frame, door and window frames are generally side perpendicularity tolerance for 2.5mm, the level of allowable deviation of horizontal frame doors and windows 2mm, windows and doors horizontal frame elevation allowable deviation is 5mm, and vertical deviation from the center allowable deviation is 5mm.

2、与墙体连接严密度检查

2, and wall connection tightness check

检查门窗边框与墙体的接缝是否紧密，门窗边框边缘可用反光镜和伸缩管组合来检查。

Check the door and window frame and the wall of the seam is close, the door and window frame edge can be used to check the mirror and telescopic tube combination.

仿古门窗厂家在安装的时候十分专业，仿古门窗的表面质量也是很影响整个墙面装饰效果的，当然还有着的就是安装好之后的紧密性，留出一个缝隙不是很好看。

Antique windows manufacturer at the time of installation is also very professional, affecting the surface quality of the antique doors and windows wall decoration effect, after the close of course have is installed, leaving a gap is not very good.